|
 SHIELD BONDING PRODUCTS
We offer Hellermann Tyton products for cable installations. Please see below some of the products we supply and contact us for a quote, or to order.
Shield Bond Connector
The shield bond connector (ACCBC) is designed to make an electrical bond to the metal shield of plastic sheath cables at terminals and at splices. Constructed of tin-plated tempered brass, the connector top and base are slightly curved to exert a continuous spring force on sheath and shield after clamping. The base is equipped with angled teeth to permit easy insertion under the cable shield and to ensure positive contact. Also included are two securing lock nuts. HellermannTytons shield bond connector can be used on all cable with 20.3 mm (0.8") or smaller outside diameter. Its current-carrying capacity is equal to or better than aluminum-shielded cables of 100 pair or less. Terminations to the conductor are made with ground straps or bonding braid.
 Flexible Bonding Braid
When used with HellermannTytons shield bond connector, the flexible, flat, #6awg rated grounding braid (ACCBB) provides a low electrical resistance connection for dependable shield bonding. Constructed of tin-plated copper, its flexibility allows for expansion and contraction that occurs to the cable and contributes to strain relief across spliced cables. The flexible bonding braid is equipped with eyelets, conveniently spaced 3" apart.
 Fiberclean
HellermannTytons Fiberclean is a fiber optic connector cleaning dispenser system, which is both economical and easy to use. This unique, handheld connector cleaner assures totally dirt and lint free field connections for the most optimal signal transmission. The Fiberclean system replaces the use of gasses, alcohol swabs, napkins, and wipes. Each dispenser contains 10 feet of 1-1/2" strips of Ultra-White non-woven, lint-free film for complete removal of dust, dirt, oil and grease from fiber and ferrule end faces.
The film is kept clean and dry until dispensed into an open window, which holds the film in place during the cleaning process. Just three figure-eight strokes with the connector to the material cleans the surface. Each 1-1/2" cleaning strip can clean up to six connectors, allowing over 400 connections to be cleaned per dispenser. Used material is dispensed out the back of the unit where it can be torn off at a perforation and thrown away.
|
with your requirements