Cable Identification Products, THERMAL TRANSFER LABELS, labels and printers, which print high density text, thermal transfer labeling systems

Cable Identification Products from Hellerman Tyton

THERMAL TRANSFER LABELS

Hellermann Tyton offers thermal transfer labeling systems, including labels and printers, which print high density text. The series of thermal transfer labels are designed specifically for thermal transfer printers and provide a clean, non-smear mark. The new Spirit handheld labeling system also incorporates thermal transfer technology.

LASER TAG LABELS

Laser Tag labels are durable, laser printable labels for applications requiring clear, crisp legibility. They are ideal for marking copper and fiber optic cables, as well as components. The labels come on 8.5"x11" sheets with specially designed adhesives and materials, ensuring the labels will not curl, change color or jam laser printers

Hellermann Tyton TabTags for dot matrix printers come on pin-fed, fan-folded sheets. TabTags are used to mark wire, cable and components.

INK JET LABELS

A series of technologically advanced labels for use on standard ink jet printers are available from Hellermann Tyton. The labels come on 8.5" x 11" sheets and are offered in a wide range of materials and sizes. When used with pigment based inks, these ink jet labels offer superior, smear resistant marks that are chemical and solvent resistant. Colors can also be printed when used on a color ink jet printer. Ink jet labels are available in polyolefin or paper.

WIRE DIAMETER GUIDE TO HELLERMANN TYTON LABELS

This guide can be used to determine which labels will work best with the wire diameter selected. Simply place the end of your wire over the appropriate circle to select the best label size.

LABELS FOR MARKING WIRE, COPPER AND FIBER OPTIC CABLES

CABLE LABELING

Horizontal and backbone subsystem cables shall be labeled at each end. For proper administration, additional cable labeling may be required on the cable at intermediate locations such as conduit ends, backbone splicing points, manholes, and pull boxes. It may be desirable that both end termination positions be marked on the cable or its labels.

ANSI/TIA/EIA-606-A-STANDARD

All labels should be of a size, color and contrast to be readily visible by those maintaining the system. Labels should be resistant to environmental conditions likely to be encountered where they are installed, such as moisture or heat, and should be designated to have a useful life equal to or greater than that of the component labeled.

E-Mail or Call us today at with your requirements

Major Product Categories